Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.     

Complexity and design of QoS routing algorithms in wireless mesh networks

Quality of service (QoS) provisioning in wireless mesh networks (WMNs) is an open issue to support emerging multimedia services. In this paper, we study the problem of QoS provisioning in terms of end-to-end bandwidth allocation in WMNs. It is challenging due to interferences in the networks. We consider widely used interference models and show that except a few special cases, the problem of finding a feasible path is NP-complete under the models. We propose a k-shortest path based algorithmic framework to solve this problem. We also consider the problem of optimizing network performance by on-line dynamic routing, and adapt commonly used conventional QoS routing metrics to be used in WMNs. We find the optimal solutions for these problems through formulating them as optimization models. A model is developed to check the existence of a feasible path and another to find the optimal path for a demand; moreover, an on-line optimal QoS routing algorithm is developed. Comparing the algorithms implemented by the proposed framework with the optimization models shows that our solution can find existing feasible paths with high probability, efficiently optimizes path lengths, and has a comparable performance to the optimal QoS routing algorithm. Furthermore, our results show that contrary to wireline networks, minimizing resource consumption should be preferred over load distribution even in lightly loaded WMNs.     

Gastroprotective effects of herbal medicines (roots)

Herbal medicines are now commonly used all over the world and this has increased global demand. Quality, safety, and efficacy of these drugs have become a serious concern. This review presents the medicinal plants cited in folklore that are used to treat gastrointestinal ulcers. Electronic databases, that is, Web of Science, PubMed, Scopus, and Google Scholar were searched to identify the gastroprotective effects of each plant. Ethnopharmacological studies have reported various botanical products with antiulcer activities, but there has been limited scientific research, presenting clinical data to validate the efficacy and safety of medicinal herbs as gastroprotective agents. Most studies centered on pharmacological properties of medicinal herbs as used animals models. This information has prompted us to compile a list of the medicinal herbs cited in folklore with gastroprotective activity.     

Chemical composition,antioxidative capacity and interactive antimicrobial potency of Satureja khuzestanica Jamzad essential oil and antimicrobial agents against selected food‐related microorganisms

This study aimed to determine the chemical composition, antimicrobial and antioxidative activity of Satureja khuzestanica Jamzad essential oil. The oil was analysed by GC and GC/MS. Twenty‐eight constituents were identified. The oxygenated monoterpenes (78.22%) were the principal compound group. Among them, carvacrol (53.86%) and thymol (19.84%) were the most abundant constituents. The oil exhibited an acceptable antimicrobial activity against most of the tested microorganisms. The checkerboard method was applied to determine fractional inhibitory concentration indices (FICIs) to interpret the synergetic, additive, indifference or antagonistic interactions between essential oil and each of antimicrobials (lysozyme, ciprofloxacin, fluconazole and amphotericin B) against food‐related microorganisms. The synergetic phenomenon (FICI ≤ 0.5) was observed in majority of combinations with the exception of the essential oil and lysozyme. The oil exhibited good 1,1‐diphenyl‐2‐picrylhydrazyl radical scavenging activity (IC₅₀ = 28.71 μg mL^?1). Also, the oil had strong antioxidative activity in β‐carotene‐linoleic acid assay relative antioxidant activity (RAA% = 95.45). This study demonstrated that the essential oil has beneficial biological properties and its simultaneous application with standard antimicrobials against food‐related microorganisms result in reduction in inhibitory doses of the antimicrobials in vitro.     

Investigations of the Failure in Boilers Economizer Tubes Used in Power Plants

In this study, failure of a high pressure economizer tube of a boiler used in gas-Mazut combined cycle power plants was studied. Failure analysis of the tube was accomplished by taking into account visual inspection, thickness measurement, and hardness testing as well as microstructural observations using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and x-ray diffraction (XRD). Optical microscopy images indicate that there is no phase transformation during service, and ferrite-pearlite remained. The results of XRD also revealed Iron sulfate (FeSO₄) and Iron hydroxide sulfate (FeOH(SO₄)) phases formed on the steel surface. A considerable amount of Sulfur was also detected on the outer surface of the tube by EDS analysis. Dew-point corrosion was found to be the principal reason for the failure of the examined tube while it has been left out-of-service.     

Image registration using log-polar mappings for recovery of large-scale similarity and projective transformations.

This paper describes a novel technique to recover large similarity transformations (rotation/scale/translation) and moderate perspective deformations among image pairs. We introduce a hybrid algorithm that features log-polar mappings and nonlinear least squares optimization. The use of log-polar techniques in the spatial domain is introduced as a preprocessing module to recover large scale changes (e.g., at least four-fold) and arbitrary rotations. Although log-polar techniques are used in the Fourier-Mellin transform to accommodate rotation and scale in the frequency domain, its use in registering images subjected to very large scale changes has not yet been exploited in the spatial domain. In this paper, we demonstrate the superior performance of the log-polar transform in featureless image registration in the spatial domain. We achieve subpixel accuracy through the use of nonlinear least squares optimization. The registration process yields the eight parameters of the perspective transformation that best aligns the two input images. Extensive testing was performed on uncalibrated real images and an array of 10,000 image pairs with known transformations derived from the Corel Stock Photo Library of royalty-free photographic images.     

Fabrication and modification of polyvinylchloride based heterogeneous cation exchange membranes by simultaneously using Fe-Ni oxide nanoparticles and Ag nanolayer: Physico-chemical and antibacterial characteristics

Polyvinylchloride-blend-styrene butadiene rubber based nanocomposite cation exchange membranes were prepared by solution casting technique. Iron-oxide nanoparticles and Ag-nanolayer were simultaneously utilized as filler and surface modifier in membrane fabrication. The effects of Ag-nanolayer film thickness on membrane physicochemical and antibacterial characteristics of nanocomposite PVC-blend-SBR/Iron-oxide nanoparticles were studied. SEM images showed membrane roughness decreasing by Ag nanolayer thickness increasing. Membrane charge density and selectivity declined by Ag nanolayer coating up to 5 nm in membranes and then showed increasing trend by more nanolayer thickness. Ionic flux also showed increasing trend. Membranes showed good ability in E-Coli removal. 20 nm Ag-nanolayer coated membrane showed better performance compared to others.